From just a glance on the screen of the layout it gives the initial impression of being quite good in as far as there aren't many errors that scream out.
One thing that I didn't like was that the down signal 111 protecting the single line over the viaduct has its overlap which locks the trailing points; this means that whilst the viaduct is in use in the opposite direction that no train can be brought up to the protecting signal and thus making the "bottleneck" effect it creates even worse.
Also it seems as if there is a missing signal from the Goods loop protecting points 404; neither are there any traps at the exit where the line joins the Passenger loop.
I'll attempt to look at over next weekend, but certainly looks as if you overall have the hang of it. Don't advise that you use highlighters in the real exam though!
One thing that I didn't like was that the down signal 111 protecting the single line over the viaduct has its overlap which locks the trailing points; this means that whilst the viaduct is in use in the opposite direction that no train can be brought up to the protecting signal and thus making the "bottleneck" effect it creates even worse.
Also it seems as if there is a missing signal from the Goods loop protecting points 404; neither are there any traps at the exit where the line joins the Passenger loop.
I'll attempt to look at over next weekend, but certainly looks as if you overall have the hang of it. Don't advise that you use highlighters in the real exam though!
(18-08-2014, 03:33 AM)asrisaku Wrote: Hi again
May I have comments for my attempts?
Thanks
Arnut
PJW